Chapter 16
| Flash/File Commands
show dual-image
◆
The destination file name should not contain slashes (\ or /), the leading letter of
the file name should not be a period (.), and the maximum length for file names
on the FTP/TFTP server is 255 characters or 32 characters for files on the access
point. (Valid characters: A-Z, a-z, 0-9, ". " , "-", "_")
◆
Due to the size limit of the flash memory, the access point supports only two
operation code files.
Example
The following example shows how to upload the configuration settings to a file on
the TFTP server:
AP# copy config tftp syscfg 192.168.1.19
Backup Config to tftp was successful!!
AP#
The following example shows how to download a configuration file:
AP# copy tftp config syscfg 192.168.1.19
Restore Config from tftp was successful.
AP#
This command displays the name of the current operation code file that booted the
system and the file saved as a secondary image.
Syntax
show dual image
Command Mode
Exec
Example
AP#show dual-image
Image
Status
-----------------------------------------------
Image A
(Active)
Image B
(Backup)
AP#
Version
1.1.0.6
1.1.0.1
– 166 –