System Management Commands; Table 5: System Management Commands - SMC Networks SMC2890W-AN Management Manual

11
System Management
Commands
These commands are used to configure the password, system logs, browser
management options, clock settings, and a variety of other system information.

Table 5: System Management Commands

Command Function
country Sets the access point country code
prompt Customizes the command line prompt
system name Specifies the host name for the access point
system-resource Sets rising and falling CPU and memory thresholds
password Specifies the password for management access
reboot-schedule Restarts the AP after a specified time
apmgmtui ssh enable Enables the Secure Shell server
apmgmtui ssh port Sets the Secure Shell port
ip telnet-server enable Enables the Telnet server
apmgmtip Specifies an IP address or range of addresses allowed
access to management interfaces
apmgmtui telnet- Enables Telnet management access
server
apmgmtui snmp Enables SNMP management access
apmgmtui http port Specifies the port to be used by the web browser
interface
apmgmtui http server Allows the access point to be monitored or configured
from a browser
apmgmtui http Sets the web interface timeout
session-timeout
apmgmtui https port Specifies the UDP port number used for a secure HTTP
connection to the access point's Web interface
apmgmtui https Enables the secure HTTP server on the access point
server
show apmanagement Shows the AP management configuration
show system Displays system information
show system resource Displays CPU and memory usage information
– 119 –
Mode Page
Exec 120
121
GC
GC 122
GC 122
GC 123
GC 124
GC 124
GC 125
GC 125
GC 129
GC 125
129
GC
GC 126
GC 126
127
GC
GC 127
GC 128
Exec 130
Exec 130
Exec 131