SMC Networks SMC2890W-AN Management Manual page 238

Chapter 25
| Wireless Security Commands
wpa-pre-shared-key
Example
AP(if-wireless 0: VAP[0])# cipher-suite tkip
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
This command defines a Wi-Fi Protected Access (WPA/WPA2) Pre-shared-key.
Syntax
wpa-pre-shared-key <hex | passphrase-key> <value>
hex - Specifies hexadecimal digits as the key input format.
passphrase-key - Specifies an ASCII pass-phrase string as the key input
format.
value - The key string. For ASCII input, specify a string between 8 and 63
characters. For HEX input, specify exactly 64 digits.
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
◆
To support WPA or WPA2 for client authentication, use the auth command to
specify the authentication type, and use the wpa-preshared-key command to
specify one static key.
◆
If WPA or WPA2 is used with pre-shared-key mode, all wireless clients must be
configured with the same pre-shared key to communicate with the access
point's VAP interface.
Example
AP(if-wireless 0: VAP[0])# wpa-pre-shared-key passphrase-key agoodsecret
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
Related Commands
auth
– 238 –