Table of Contents
Advertisement
| Maintenance Settings
C
9
HAPTER
Running Configuration
R
C
UNNING
ONFIGURATION
A copy of a previous running configuration may be uploaded to the access
point as a saved file from a remote location, or the current configuration
saved and stored for restoration purposes at a later point. A configuration
file may be saved or downloaded to/from a specified remote FTP or TFTP
server.
Figure 54: Running Configuration File
The following items are displayed on this page:
File Backup/Restore — Downloads an operation code image file from
◆
a specified remote FTP or TFTP server. After filling in the following
fields, click Start Export/Import to proceed.
Export/Import — Select Export to upload a file to an FTP/TFTP server.
◆
Select Import to download a file from an FTP/TFTP server.
Config file — Specifies the name of the configuration file, which must
◆
always be "syscfg." A path on the server can be specified using "/" in
the name, providing the path already exists; for example, "myfolder/
syscfg." Other than to indicate a path, the file name must not contain
any slashes (\ or /), the leading letter cannot be a period (.), and the
– 106 –
Advertisement
Table of Contents
