Qos Commands; Table 29: Qos Commands - SMC Networks SMC2890W-AN Management Manual

31
qos vap-802.1p

QoS Commands

The QoS commands configure QoS priority mapping for traffic on VAP interfaces.
The AP enables Wi-Fi Multimedia (WMM) 802.1d priorities to be mapped to 802.1p
priorities or IP DSCP priorities.

Table 29: QoS Commands

Command Function
qos vap-802.1p Enables the setting of VAP traffic to a specific 802.1p
priority value
qos vap-802.1p Sets the 802.1p priority value for VAP traffic
retagged-user-
priority
qos 802.1d-802.1p Enables the mapping of WMM 802.1d priority values to
802.1p values
qos 802.1d-802.1p Sets the mapping template for WMM 802.1d to 802.1p
mapping-template priority mapping
qos 802.1d-dscp Enables the mapping of WMM 802.1d priority values to IP
DSCP values
qos 802.1d-dscp Sets the mapping template for WMM 802.1d to IP DSCP
mapping-template priority mapping
qos qos-template qos- Sets the name for a QoS mapping template
template-name
qos qos-template qos- Maps priority values in a QoS mapping template
template-priority
qos qos-template qos- Shows the priority mapping in all QoS templates
template-show
This command enables the setting of VAP traffic to a specific 802.1p priority value.
Syntax
qos vap-802.1p <enable | disable>
enable - Enables the VAP traffic mapping to an 802.1p priority value.
disable - Disables the feature.
Default
Disabled
Command Mode
Interface Configuration (Wireless-VAP)
– 263 –
Mode Page
IC-W 263
VAP
IC-W 264
VAP
IC-W 265
VAP
IC-W 265
VAP
IC-W 266
VAP
IC-W 267
VAP
IC-W 268
VAP
IC-W 268
VAP
IC-W 269
VAP