SMC Networks SMC2890W-AN Management Manual page 105

■ RxRate (Mbps) — The data receive rate from the AP client.
IP — The IP address assigned to the AP client.
■
Privacy — The data encryption method used by the AP client.
■
Authentication — The authentication method used by the AP client.
■
◆
WDS-AP Status — The status of other APs in WDS-AP mode connected to AP
interfaces.
Station Address — The MAC address of the WDS-enabled AP.
■
RSSI — The Receive Signal Strength Indicator of the received signal sent
■
from the peer WDS AP.
Remote RSSI — The Receive Signal Strength Indicator of the AP signal
■
received by the peer WDS-AP.
– 105 –
Chapter 8
| Status Information
WDS Status