Table of Contents
Advertisement
Chapter 24
| Wireless Interface Commands
disable-coexist
make-rf-setting-
effective
Example
AP(if-wireless 0)# min-allowed-rate 1 6 mcs0 mcs8
AP(if-wireless 0)#
This command prevents the operation of both 20 MHz and 40 MHz channel
bandwidths in the wireless network.
Syntax
disable-coexist <n | y>
n - No, do not disable channel coexistance.
y - Yes, disable channel coexistance.
Default Setting
No
Command Mode
Interface Configuration (Wireless)
Example
AP(if-wireless 0)# disable-coexist y
AP(if-wireless 0)#
This command implements all wireless command changes made in current CLI
session.
Syntax
make-rf-setting-effective
Command Mode
Interface Configuration (Wireless)
Example
AP(if-wireless 0)# make-RF-setting-effective
It will take several minutes !
Please wait a while...
AP(if-wireless 0)#
– 212 –
Advertisement
Table of Contents
