Table of Contents
Advertisement
Who Should Read This
Guide?
How This Guide is
Organized
Related
Documentation
How to Use This Guide
This guide includes detailed information on the access point (AP) software,
including how to operate and use the management functions of the AP. To deploy
this AP effectively and ensure trouble-free operation, you should first read the
relevant sections in this guide so that you are familiar with all its software features.
This guide is for network administrators who are responsible for operating and
maintaining network equipment. The guide assumes a basic working knowledge of
LANs (Local Area Networks), the Internet Protocol (IP), and Simple Network
Management Protocol (SNMP).
The organization of this guide is based on the AP's main management interfaces.
The web management interface and command line interface (CLI) are described in
separate sections. An introduction and initial configuration information is also
provided.
The guide includes these sections:
◆
Section I
"Getting Started"
initial configuration settings.
◆
Section II
"Web Configuration"
through the web interface.
◆
Section III
"Command Line Interface"
CLI and details on all CLI commands.
◆
Section IV
"Appendices"
management access.
This guide focuses on AP software configuration, it does not cover hardware
installation of the AP. For specific information on how to install the AP, see the
following guide:
Installation Guide
For all safety information and regulatory statements, see the following documents:
Quick Start Guide
Safety and Regulatory Information
— Includes an introduction to AP management and
— Includes all management options available
— Includes information on how to use the
— Includes information on troubleshooting AP
– 5 –
Advertisement
Table of Contents
