Table of Contents
Advertisement
Chapter 22
| WDS Bridge Commands
show wds wireless
Default Setting
None
Command Mode
Interface Configuration (Wireless) VAP
Command Usage
In WDS-STA mode, the VAP operates as a client station in WDS mode, which
connects to an access point in WDS-AP mode. The user needs to specify the SSID
and MAC address of the VAP to which it intends to connect.
Example
AP(if-wireless 0 [VAP 0])#wds sta ap-ssid red address 00-11-22-33-44-55
AP(if-wireless 0 [VAP 0])#
This command displays the current WDS settings for VAPs.
Syntax
show wds wireless <index> vap {all | <vap-index>}
index -The wireless interface index number. (Option: 0)
vap-index - The VAP index number. (Range: 0-7)
Command Mode
Exec
Example
AP# show wds wireless 0 vap 0
WDS Status(wireless 0 vap 0)
==========================================
Status: up
Mode: STA
AP SSID: red
AP MAC: 00:11:22:33:44:55
==========================================
AP#
– 198 –
Advertisement
Table of Contents
