Ipv6 Address; Figure 11: Ipv6 Configuration - SMC Networks SMC2890W-AN Management Manual

802.11a/b/g/n outdoor dual-band wireless access point
Hide thumbs Also See for SMC2890W-AN:
Table of Contents

Advertisement

Chapter 3
| System Settings

IPv6 Address

IPv6 Address
If you have management stations, DNS, RADIUS, or other network servers
located on another subnet, type the IP address of the default gateway router in
the text field provided.
Primary and Secondary DNS Address — The IP address of Domain Name
Servers on the network. A DNS maps numerical IP addresses to domain names
and can be used to identify network hosts by familiar names instead of the IP
addresses.
If you have one or more DNS servers located on the local network, type the IP
addresses in the text fields provided.
Management IP — The IPv4 address of the AP through which you can access
management interfaces.
Management IP Address — Specifies an IPv4 address for management of
the access point. (Default: 192.168.1.10.)
Management Subnet Mask — Indicates the local subnet mask.
(Default: 255.255.255.0)
This section describes how to configure an IPv6 interface for management access
over the network. This AP supports both IPv4 and IPv6, and can be managed
through either of these address types.
By default, the AP will be not be automatically configured with IPv6 settings from a
DHCPv6 server. The default IPv6 address is 2001:db8::1, subnet mask 64 and a
default gateway of 2001:db8::2.

Figure 11: IPv6 Configuration

The following items are displayed on this page:
– 36 –

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smc2891w-an

Table of Contents