SMC Networks SMC2890W-AN Management Manual page 153

snmp-server location
snmp-server enable
server
Command Mode
Global Configuration
Example
AP(config)#snmp-server contact Paul
AP(config)#
Related Commands
snmp-server location
This command sets the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location <text>
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
AP(config)#snmp-server location WC-19
AP(config)#
Related Commands
snmp-server contact
This command enables SNMP management access and also enables this device to
send SNMP traps (i.e., notifications). Use the no form to disable SNMP service and
trap messages.
Syntax
[no] snmp-server enable server
Default Setting
Enabled
– 153 –
Chapter 15
| SNMP Commands