Access Control Lists; Source Address Settings; Figure 29: Source Acls - SMC Networks SMC2890W-AN Management Manual

Access Control Lists

Source Address
Settings
Access Control Lists allow you to configure a list of wireless client MAC addresses
that are not authorized to access the network. A database of MAC addresses can be
configured locally on the access point.
The ACL Source Address Settings page enables traffic filtering based on the source
MAC address in the data frame.

Figure 29: Source ACLs

The following items are displayed on this page:
◆
SA Status — Enables network traffic with specific source MAC addresses to be
filtered (dropped) from the access point.
◆
MAC Address — Specifies a source MAC address to filter, in the form
xx.xx.xx.xx.xx.xx, or xx-xx-xx-xx-xx-xx.
◆
Action — Selecting "Add" adds a new MAC address to the filter list, selecting
delete removes the specified MAC address.
◆
Number — Specifies the number associated with the MAC address.
◆
MAC Address — Displays the configured source MAC address.
– 63 –
Chapter 5
| Advanced Settings
Access Control Lists