Chapter 21
| Spanning Tree Commands
show bridge status
ATH3 configuration
========================================
Link Port Priority
Link Path Cost
========================================
ATH4 configuration
========================================
Link Port Priority
Link Path Cost
========================================
ATH5 configuration
========================================
Link Port Priority
Link Path Cost
========================================
ATH6 configuration
========================================
Link Port Priority
Link Path Cost
========================================
ATH7 configuration
========================================
Link Port Priority
Link Path Cost
========================================
AP#
This command displays STP bridge status for a specified VLAN or all VLANs.
Syntax
show bridge status <all | vlan-id>
all - Keyword to show the bridge status for all VLANs.
vlan-id - Specifies a VLAN ID. (Range: 0-4095)
Command Mode
Exec
Example
AP# show bridge status all
br0 status
=====================================================
Bridge ID
Designated Root ID
Root Port
ath0 --- port 0x2
Port ID
Designated Root ID
: 32
: 19
: 32
: 19
: 32
: 19
: 32
: 19
: 32
: 19
: 8000.0012cfa25430
: 8000.0012cfa25430
: 0
: 0x8002
: 8000.0012cfa25430
– 194 –