Figure 21: Snmp Basic Settings - SMC Networks SMC2890W-AN Management Manual

strings to be configured for authentication. Trap notifications can be enabled and
sent to up to four management stations.

Figure 21: SNMP Basic Settings

The following items are displayed on this page:
◆
SNMP — Enables or disables SNMP management access and also enables the
access point to send SNMP traps (notifications). (Default: Disable)
◆
System Location — A text string that describes the system location.
(Maximum length: 255 characters)
◆
System Contact — A text string that describes the system contact. (Maximum
length: 255 characters)
◆
Read-Only Community — Defines the SNMP community access string that
has read-only access. Authorized management stations are only able to retrieve
MIB objects. (Maximum length: 23 characters, case sensitive; Default: public)
◆
Read-Write Community — Defines the SNMP community access string that
has read/write access. Authorized management stations are able to both
retrieve and modify MIB objects. (Maximum length: 23 characters, case
sensitive; Default: private)
Simple Network Management Protocol
– 53 –
Chapter 4
| Management Settings