SMC Networks SMC2890W-AN Management Manual page 74

802.11a/b/g/n outdoor dual-band wireless access point
Hide thumbs Also See for SMC2890W-AN:
Table of Contents

Advertisement

Chapter 6
| Wireless Settings
Radio Settings
propagation delays, echoes, and reflections to which digital data is normally
very sensitive. Enabling the Short Guard Interval sets it to 400ns. (Default:
Disabled)
Aggregate MAC Protocol Data Unit (A-MPDU) — Enables / disables the
sending of this four frame packet header for statistical purposes. (Default:
Enabled)
A-MPDU Length Limit (1024-65535) — Defines the A-MPDU length. (Default:
65535 bytes; Range: 1024-65535 bytes)
Aggregate MAC Service Data Unit (A-MSDU) — Enables / disables the
sending of this four frame packet header for statistical purposes. (Default:
Enabled)
Disable HT20/HT40 Coexistance — Prevents 802.11n 20 MHz and 40 MHz
channel bandwidths from operating together in the same network.
(Default: Disabled)
Antenna Selection — Sets the radio to use one or both antennas. (Options:
Left, Right, Right+Left; Default: Right+Left)
Minimum CCK Rate — (2.4 GHz radio only) The minimum CCK data rate at
which the AP transmits packets on the wireless interface. (Options: 1, 2, 5.5,
11 Mbps; Default 1 Mbps)
Minimum OFDM Rate — The minimum OFDM data rate at which the AP
transmits packets on the wireless interface. (Range: 6, 9, 12, 18, 24, 36, 48,
54 Mbps; Default 6 Mbps)
Minimum Single Stream Rate — The minimum 802.11n single stream data
rate at which the AP transmits packets on the wireless interface. (Range: MCS0-
MCS7; Default MCS0)
Minimum Double Stream Rate — The minimum 802.11n double stream data
rate at which the AP transmits packets on the wireless interface. (Range: MCS8-
MCS15; Default MCS8)
Long Distance Setting — When you have long-distance links in the wireless
network, some timing parameters require an adjustment to maintain
communications.
Enter the approximate distance (in meters) of the client from the AP. Click on
the "Show Reference Data" button to compute a set of recommended values
for SlotTime, ACKTimeOut and CTSTimeOut. You can use the recommended
values or enter your own values that work for your specific environment.
Set Radio — Sets all entered parameters.
– 74 –

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smc2891w-an

Table of Contents