Table of Contents
Advertisement
Example
show link-integrity
This command displays the current link integrity configuration.
Command Mode
Exec
Example
AP(config)# link-integrity link-fail-action 0 enable
AP(config)#
AP#show link-integrity
Link Integrity Information
===================================================================
Link integrity:
Destination IP:
Detect Interval:
Response Timeout:
Retry Count if no response:
Link fail action - Shutdown Radio 0: disabled
Link fail action - Shutdown Radio 1: disabled
AP#
– 249 –
Chapter 27
| Link Integrity Commands
disabled
192.168.2.254
60
2
5
Advertisement
Table of Contents
