S
The diskette labeled "Utility Diskette" that comes with the package
contains a utility program for the EZ Connect Wireless Access Point/
Bridge. Updates may be downloaded from SMC's web site at:
http://www.smc.com
Warning: Back up your utility diskette and use the copy as the working
The SMC2682W can be configured over an Ethernet network connection
via its RJ-45 port. Connect the SMC2682W to any Ethernet device such as
a hub or switch. Run the utility program and configure the unit remotely as
described below:
Windows Installation
1. Insert the SMC2682W utility disk into the floppy drive on your PC,
and then enter the following command: "A:\utility\setup." Follow the
on-screen instructions to install the utility program.
2. Run the installed utility, click on "AP/Bridge" and then select "Scan"
from the menu. The program will detect all SMC2682W Wireless AP/
Bridges on the network.
3. If DHCP is turned "ON" (default setting, page 20) and a DHCP
8
YSTEM
diskette to protect the original from accidental damage.
C
ONFIGURATION
(95/98/2000/Me/NT/XP)