Access Limitation; Figure 20: Access Limitation - SMC Networks SMC2890W-AN Management Manual

Access Limitation

◆
HTTP Port — Specifies the HTTP port for IP connectivity. (Default: 80; Range
1024-65535)
◆
HTTPS Server — Enables/disables management access from a HTTPS server.
(Default: enabled)
◆
HTTPS Port — Specifies the HTTPS port for secure IP connectivity. (Default:
443; Range 1024-65535)
◆
SNMP Access — Enables management access through SNMP. For more
information on SNMP access, see
page 52. (Default: enabled)
The Access Limitation page limits management access to the access point from
specified IP addresses or wireless clients.

Figure 20: Access Limitation

The following items are displayed on the Access Limitation page:
IP Management Control
◆
Any IP — Indicates that any IP address is allowed management access.
◆
Single IP — Specifies a single IP address that is allowed management access.
◆
Multiple IP — Specifies an address range as defined by the entered IP address
and subnet mask. For example, IP address 192.168.1.6 and subnet mask
255.255.255.0, defines all IP addresses from 192.168.1.1 to 192.168.1.254.
"Simple Network Management Protocol" on
– 51 –
Chapter 4
| Management Settings
Access Limitation