SMC Networks SMC2890W-AN Management Manual page 126

Chapter 11
| System Management Commands
apmgmtui http port
apmgmtui http server
Default Setting
Interface enabled
Command Mode
Global Configuration
Example
AP(config)# apmgmtui telnet-server enable
AP(config)#
This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
apmgmtui http port <port-number>
no apmgmtui http port
port-number - The TCP port to be used by the browser interface. (Range: 80
or 1024-65535)
Default Setting
80
Command Mode
Global Configuration
Example
AP(config)# apmgmtui http port 769
AP(config)
Related Commands
apmgmtui http server
This command allows this device to be monitored or configured from a web
browser. Use the no form to disable this function.
Syntax
[no] apmgmtui http server
Default Setting
Enabled
– 126 –