Figure 42: Qos Template Setting - SMC Networks SMC2890W-AN Management Manual

Both "802.1d to 802.1p" mapping and "802.1d to DSCP" mapping can be
enabled simultaneously when the default VLAN ID for the VAP is any other
value than 1. When only "802.1d to DSCP" mapping is enabled, the default
VLAN ID for the VAP must be set to 1.
◆
QoS Template — Enables up to eight user-defined priority mapping tables to
be configued. The tables are used to map the WMM 802.1d priorities to 802.1p/
DSCP priorities.
Click the "Edit" link in the list to define a template priority map.

Figure 42: QoS Template Setting

The following items are displayed in the QoS Template Setting page:
◆
QoS Template Name — A descriptive name that identifies the mappng
template. All eight templates have a default name that can be edited by the
user (maximum 32 characters).
◆
Vap/802.1d (Default User Priority) — The WMM 802.1d priority value in a
tagged packet.
◆
802.1p/DSCP (Retagged User Priority) — The 802.1p or IP DSCP priority
value that replaces the WMM 802.1d value in tagged packets. (Range: 0-7)
– 83 –
Chapter 6
| Wireless Settings
Virtual Access Points (VAPs)