Show Snmp Vacm View - SMC Networks SMC2890W-AN Management Manual

Chapter 15
| SNMP Commands

show snmp vacm view

Example
AP# show snmp
SNMP Information
==============================================
Service State
Community (ro)
Community (rw)
Location
Contact
==============================================
Trap Destination List:
==============================================
Trap Destination: 192.168.1.22,
==============================================
Trap Configuration:
==========================================================================
systemUp: Disabled
==========================================================================
AP#
This command displays the configured SNMP v3 views.
Syntax
show snmp vacm view [view-name]
view-name - The name of a user-defined SNMPv3 view.
Command Mode
Exec
Example
AP# sh snmp vacm view
View List:
==================================
View Name : defaultview
Type : included
OID : .1
Mask :
View Name : testview
Type : included
OID : .1
Mask :
Type : excluded
OID : .13.6.1.2.1.2.2.1.2.1.1
Mask :
==================================
AP#
: Enable
: *******
: ********
: where?
: who?
Community : *****
– 162 –
systemDown: Disabled