Ap Wireless Configuration; Figure 53: Ap Wireless Configuration - SMC Networks SMC2890W-AN Management Manual

802.11a/b/g/n outdoor dual-band wireless access point
Hide thumbs Also See for SMC2890W-AN:
Table of Contents

Advertisement

Chapter 8
| Status Information
AP Status
AP Wireless
Configuration
The AP Wireless Configuration displays the VAP interface settings for the 2.4 GHz
and 5 GHz radios.

Figure 53: AP Wireless Configuration

The following items are displayed on this page for the 2.4 GHz and 5 GHz radio
interfaces:
VAP — Displays the VAP number.
SSID — The service set identifier for the VAP interface.
Status — Displays the interface mode setting, either "ap", "wds-ap", or "wds-sta".
Association Mode — Shows the basic security mode configured for the VAP.
Encryption Method — Displays the encryption method used on the interface.
802.1X — Shows if IEEE 802.1X access control for wireless clients is enabled.
MAC Address — Displays the MAC address of the VAP interface.
– 100 –

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smc2891w-an

Table of Contents