Table of Contents
Advertisement
show bridge forward
address
Designated Bridge ID : 8000.0012cfa25430
Root Port Path Cost
State
eth0 --- port 0x1
Port ID
Designated Root ID
Designated Bridge ID : 8000.0012cfa25430
Root Port Path Cost
State
=====================================================
AP#
This command displays STP settings for forwarding MAC addesses on specified
interfaces or VLANs.
Syntax
show bridge forward address {all | mac <mac-address> |
<vlan-id>}
show bridge forward address {ethernet | wireless <index> vap <vap-index>}
all - Show settings for all forwarding MAC addresses.
mac - Show settings for specific forwarding MAC addresses. MAC addresses
are specified in the form xx-xx-xx-xx-xx-xx.
ethernet - The Ethernet port interface.
wireless - The wireless port interface.
vap - Wireless VAP interfaces. (Wireless Range: 0;
VAP Range: 0-7)
vlan-id - Show settings for forwarding addresses on specific VLANs. (Range:
0-4095)
Command Mode
Exec
Example
AP# show bridge forward-addr interface wireless 0 vap 0
MAC ADDRESS
=====================================================
02:12:cf:a2:54:30
=====================================================
AP#
Chapter 21
: 0
: FORWARDING
: 0x8001
: 8000.0012cfa25430
: 0
: DISABLED
INTERFACE
VLAN
AGE
ath0
0
– 195 –
| Spanning Tree Commands
0
Advertisement
Table of Contents
