SMC Networks SMC2890W-AN Management Manual page 161

Example
AP# show snmp target
Target List:
==================================
Target ID
IP Address : 192.168.1.33
User Name
UDP Port
Filter ID
==================================
AP#
show snmp filter
This command displays the SNMP v3 notification filter settings.
Syntax
Command Mode
Exec
Example
AP# show snmp filter
Filter List:
==================================
Filter: defaultfilter
Filter: testfilter
==================================
AP#
show snmp
This command displays the SNMP configuration settings.
Command Mode
Exec
: christraps
: chris
: 4321
: Not Defined
show snmp filter [filter-id]
filter-id - A user-defined name that identifies an SNMP v3 notification filter.
(Maximum length: 32 characters)
Type: Included
Subtree: .1
Type: Excluded
Subtree: .1.3.6.1.2.1.2.2.1.1.23
Type: Excluded
Subtree: .13.6.1.2.1.2.2.1.2
– 161 –
Chapter 15
| SNMP Commands