SMC Networks SMC2890W-AN Management Manual page 134

Chapter 11
| System Management Commands
There is no group.
==================================
User List:
==================================
There is no SNMPv3 User.
==================================
Target List:
==================================
There is no SNMP target.
==================================
Filter List:
==================================
There is no notification filter.
==================================
Bridge STP Information
==================================
Bridge MAC : 70:72:CF:00:11:70
Status : Disabled
priority : 32768
Hello Time : 2 seconds
Maximum Age : 20 seconds
Forward Delay : 15 seconds
==================================
Bridge Aging Time Information
==============================================================
Aging time: 20
==============================================================
Logging Information
=====================================================
Syslog State
Logging Console State
Logging Level
Servers
1: 10.7.16.98, UDP Port: 514, State: DISABLE
2: 10.7.13.48, UDP Port: 514, State: DISABLE
3: 10.7.123.123, UDP Port: 514, State: DISABLE
4: 10.7.13.77, UDP Port: 514, State: DISABLE
=====================================================
Protocol Filter Information
=======================================================================
Local Bridge :DISABLED
access-limitation :DISABLED
dhcp :DISABLED
EtherType Filter :DISABLED
Enabled EtherType Filters
-----------------------------------------------------------------------
=======================================================================
ACL Information
==========================================
Source Filter :DISABLED
Source MAC :
==========================================
ACL Information
==========================================
– 134 –
: DISABLE
: DISABLE
: Debug