Table of Contents
Advertisement
Chapter 19
| MAC Address Authentication Commands
mac-authentication
server local address
default
mac-authentication
server local address
entry
Example
AP(config)#mac-authentication server remote
AP(config)#
Related Commands
mac-authentication server local address entry
radius-server address
This command sets local filtering to allow or deny listed MAC addresses.
Syntax
mac-authentication server local address default <allowed | denied>
allowed - Only MAC addresses entered as "denied" in the address filtering
table are denied.
denied - Only MAC addresses entered as "allowed" in the address filtering
table are allowed.
Default
Allowed
Command Mode
Global Configuration
Example
AP(config)#mac-authentication server local address default denied
AP(config)#
Related Commands
mac-authentication server local address entry
This command enters a MAC address in the local filter table.
Syntax
mac-authentication server local address entry <allowed | denied> <mac-
address>
allowed - Entry is allowed access.
denied - Entry is denied access.
mac-address - Physical address of client. (Enter six pairs of hexadecimal
digits separated by hyphens; e.g., 00-90-D1-12-AB- 89.)
– 176 –
Advertisement
Table of Contents
