mac-authentication
server local address
delete
Default
None
Command Mode
Global Configuration
Command Mode
◆
The access point supports up to 1024 MAC addresses.
◆
An entry in the address table may be allowed or denied access depending on
the global setting configured for the
default
command.
Example
AP(config)#mac-authentication server local address entry allowed 00-70-50-cc-
99-1a
AP(config)#
Related Commands
mac-authentication server local address default
This command deletes a MAC address from the local filter table.
Syntax
mac-authentication server local address delete <allowed | denied> <mac-
address>
allowed - Entry is allowed access.
denied - Entry is denied access.
mac-address - Physical address of client. (Enter six pairs of hexadecimal
digits separated by hyphens; e.g., 00-90-D1-12-AB-89.)
Default
None
Command Mode
Global Configuration
Example
AP(config)#mac-authentication server local address delete allowed 00-70-50-
cc-99-1b
AP(config)#
Chapter 19
| MAC Address Authentication Commands
mac-authentication server local address
– 177 –