Dram & Flash Utilization; Port Utilization - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Record Number
Show/Hide
Click the Apply button to accept the changes made.
DRAM & Flash Utilization
This window is used to display information regarding the DRAM and Flash utilization.
To view this window, click Monitoring > Utilization > DRAM & Flash Utilization as shown below:

Port Utilization

This window is used to display the percentage of the total available bandwidth being used on the port.
To view this window, click Monitoring > Utilization > Port Utilization as shown below:
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Check whether or not to display Five Seconds, One Minute, and Five Minutes.
Figure 11-2 DRAM & Flash Utilization window
354