Impb Entry Settings; Mac Block List - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide

IMPB Entry Settings

This window is used to create static IP-MAC-binding port entries and view all IMPB entries on the Switch.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > IMPB Entry Settings as shown below:
The fields that can be configured are described below:
Parameter
IP Address
MAC Address
Ports
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to configure the specified entry.
Click the Delete button to remove the specified entry.
Click the View All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.

MAC Block List

This window is used to view unauthorized devices that have been blocked by IP-MAC binding restrictions.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > MAC Block List as shown below:
The fields that can be configured are described below:
Parameter
VLAN Name
MAC Address
Click the Find button to find an unauthorized device that has been blocked by the IP-MAC binding restrictions
Figure 11-28 IMPB Entry Settings window
Description
Enter the IP address to bind to the MAC address set below.
Enter the MAC address to bind to the IP Address set above.
Specify the switch ports for which to configure this IP-MAC binding entry (IP Address
+ MAC Address). Tick the All Ports check box to configure this entry for all ports on
the Switch.
Figure 11-29 MAC Block List
Description
Enter a VLAN Name.
Enter a MAC address.
213