Changing A Coloring Setting That Has Been Previously Set - Oce Color System 200 Operator's Manual

Changing a Coloring Setting That Has Been Previously Set

The items that can be carried out with the
Coloring function are as follows.
Adding a new coloring setting.
Changing a coloring setting.
Changing the target.
[background (designated area/entire
enclosed), Image coloring]
Adding/Deleting an area point.
Changing the color.
Deleting a coloring setting.
If the CLEAR COLORING key is pressed, the
Coloring setting that has been previously set are all
deleted. Select YES or NO .
When there are no COLORING keys on the
screen displayed that are not reversed, press the
NEXT PAGE key to display the next screen.
The following steps are from the screen after the Coloring setting is
complete.
Adding a coloring setting
1.
Press the COLORING
2.
Press the COLORING that is not highlighted.
3.
Use the edit pen to designate the part of the original that
you want to copy.
BACKGROUND COLORING : Press this key to add color to the
IMAGE COLORING :
key.
background, excluding parts of the
image that are inside the area.
Press this key to add color to parts of
the image that are inside the area.
Color Creation
1-49