Oce Color System 200 Operator's Manual page 139

For Designated Area, only BASE COLOR can
be selected.
The initial setting for the bordered area
designation is ENTIRE ENCLOSED .
For Enclosed Area, only BASE COLOR, PAINT,
COLOR FILTER, or NEGA/POSI can be selected.
If designated area is selected for one-point
designation, BASE COLOR is selected
automatically.
The initial setting for the bordered area
designation is SINGLE COLOR .
The Paint function adds color to a designated
area.
Marker Editing (Partial Editing by Designating an Area with the Highlight Markers)
Changing the Editing Feature
1. Press either the One-point Designation
Encircled Designation
For One-point Designation
For Encircled Designation
2. Select the Marker Editing method.
For One-point Designation
ENTIRE ENCLOSED : The entire region within the border is
DESIG. AREA :
For Encircled Designation
ENTIRE ENCLOSED : The entire region enclosed by the highlight
ENCLOSED AREA :
3. Select the editing function.
If a key for an editing function is pressed, the corresponding function
setting screen is displayed. The setting methods are described on
the pages indicated.
FRAMING see p. 3-9
BLANKING see p. 3-9
SINGLE COLOR see p. 1-31 TEXT EDITING
BASE COLOR see p. 1-42 NEGA/POSI
COLOR FILTER see p. 1-38 ORIGINAL TYPE see p. 2-25
4. Press the OK key.
mode key or the
mode key.
recognized as an area.
If another border exists inside the border, the
entire area except for the region inside the
inner border is recognized as an area.
marker is recognized as an area.
The image inside the area enclosed by the
highlight marker is recognized as the target.
PAINT
(Basic Operations Manual)
see p. 1-44
see p. 2-10
see p. 2-7
3-31