Table of Contents
Advertisement
The Enclosed Area designation method for
designating non-rectangular areas can not be used
to designate an area.
If the same editing function will be used with
multiple areas, repeat step 6.
Character Composition (Combining Characters from a Black-and-White Original with a Color Original)
4.
Press the SUPERIMPOSE key.
5.
Place the black-and-white character original on the
Editor.
Align the character original face up with the V mark on the Editor.
6.
Designate the superimpose area.
There are two methods for designating the superimpose area.
Designating a rectangular area (see p. 3-8)
Designating a non-rectangular area (see pp. 3-8, 3-12)
7.
Press the OK key.
4-23
Advertisement
Table of Contents
