Registered Color Selection (Recalling Colors That Have Been Previously Registered) - Oce Color System 200 Operator's Manual

Registered Color Selection (Recalling Colors That Have Been Previously Registered)

When no color is registered at all, the
REGISTERED COLOR key is shaded and can
not be selected.
Numbers that do not correspond to registered
colors are shaded and can not be selected.
If fine adjustments to a registered color are
made, then even if the same registered color is
selected to be used for another mode, that color is
automatically set to the fine adjusted color.
Select a color from colors that have been previously registered.
The following procedure is performed in the color selection screen for each
function.
1.
Press the REGISTERED COLOR key.
2.
Press the key that you want to recall.
If necessary, press either the + key or the – key to adjust the color.
3.
Press the OK key.
The color selection process is now complete.
Color Selection Flow (Selecting Colors within Settings for Each Function)
1-69