Oce Color System 200 Operator's Manual page 64

If the CLEAR COLORING key is pressed, the
Coloring setting that has been previously set are all
deleted. Select YES or NO .
When you can not find the Coloring Setting you
want to change, if the C key is pressed the
Coloring settings are cleared and the screen returns
to the standard display.
If the OK key is pressed the settings for
Coloring are not changed and the screen returns to
the standard display.
Area Editing is also shown, but can not be
selected here.
Points included in the Coloring Setting selected
are displayed.
If you press the ADD/ADJUST COLORING
key, you can change/add Coloring setting that has
been set.
Color Creation
1-52
Changing a color processing
1.
Press the COLORING
2.
Press the COLORING
If the required Coloring setting is not found, press the NEXT PAGE key
to display the next screen.
3.
Select the target to which color is to be added.
BACKGROUND COLORING : Press this key to add color to the
IMAGE COLORING :
key.
key for the setting to be changed.
background, excluding parts of the
image that are inside the area.
Press this key to add color to parts of
the image that are inside the area.