Oce Color System 200 Operator's Manual page 97

When the original color is set in the Color for
Text or the Image & Shadow mode after setting it in
the Contour mode, the color setting in the Contour
mode will be canceled. When colors other than the
original color are set in the Color for Text or the
Image & Shadow mode after setting these in the
Contour mode, these settings in the Contour mode
will also be canceled.
The COLOR FOR TEXT key and the
IMAGE & SHADOW key can also be pressed to
continue the setting process.
If the SHADOW ONLY key is pressed, the
Color For Text setting is canceled.
Other Image Creation modes can also be set.
When specifying a color for the contour
1. Press the CONTOUR COLOR key.
2. Select the color.
There are five methods for selecting a color.
Select a color from the color palette.
(Color Palette Selection) (See p. 1-65.)
Select a color from the original.
(Designated Color Selection) (See p. 1-67.)
Select a color that was previously registered.
(Registered Color Selection) (See p. 1-69.)
Select a color from the color wheel.
(Color Wheel Selection) (See p. 1-70.)
Select the color of the original as it is.
(Original Color Selection) (See p. 1-71.)
After a color is selected, Contour Color is set.
5.
Press the OK key.
The Contour settings are complete.
6.
Press the OK key.
The Text Editing settings are complete.
7.
Press the OK key.
The Image Creation setting process is complete.
TEXT EDITING is displayed.
The copier is now ready to make copies.
Image Creation
2-13