Oce Color System 200 Operator's Manual page 96

For details on how to program the basic copy
settings, see p. 2-4 of chapter 2 "Basic Copying" in
the Basic Operations Manual.
For details on the Color Selection Flow, see
"Color Selection Flow (Selecting Colors within
Settings for Each Function)", on p. 1-63.
If the C key is pressed, the screen returns to
the standard display.
If the C key is pressed, the screen returns to
the display in step 1.
If the C key is pressed, the screen returns to
the display in step 2.
Contour width:
[0.25 mm]* [0.5 mm]
[0.75 mm] [1.0 mm]
[1.25 mm] [1.5 mm]
*Initial setting
Image Creation
2-12
Setting Contour
The Contour mode makes copies of only the contours of the image. The
color of the contours can be specified.
1.
Image
Press the Creation key.
2.
Select the TEXT EDITING key.
3.
Select the CONTOUR key.
4.
Specify the width of the contour.
Press either the + key or the – key to select the width.