Table of Contents
Advertisement
Color Palette Selection (Selecting Colors from the Color Palette)
For instructions on color palette switching, see
"Change Color Sheet," on p. 7-8 in the Basic
Operations Manual.
Until the OK key is pressed colors can be
changed with the edit pen.
If fine adjustments to a color on the color palette
are made, then even if the same color is selected to
be used for another mode, that color is
automatically set to the fine adjusted color.
Select colors from the Editor's color palette. You can switch between the
three color palette sheets provided and a custom sheet.
There are two methods for color palette selection.
Selecting the desired palette using the edit pen.
Entering the number of the desired palette using the Number keys.
The following procedure is performed on the Color Selection Screen of
each function.
1.
Select one color from the color palette.
Selecting the desired color on the palette using the edit pen.
1. Press the color on the palette with the edit pen.
2. Press either the + key or – key to adjust the color if necessary.
Color Selection Flow (Selecting Colors within Settings for Each Function)
1-65
Advertisement
Table of Contents
