Logging In To This Machine; When [1-To-Many Authentication] Has Been Specified - Oce VarioLink 2222c User Manual

10
15
Turn the Main Power Switch of this machine off, connect the authentication unit to this machine, and
turn the Main Power Switch of this machine on.
NOTICE
To turn the Main Power Switch off and on, first turn the Main Power Switch off, and then turn it on
after 10 or more seconds has elapsed. Not doing so may result in an operation failure.
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
10.1.3

Logging in to this machine

This section explains how to log in to this machine with the finger vein pattern authentication.
- To use authentication unit (biometric type), register the finger vein pattern in advance.
- If authentication fails frequently, finger vein patterns may not be registered properly. Register finger vein
patterns again.
- Authentication is carried out when you simply place your finger on the [1-to-many authentication]. Au-
thentication is carried out when you enter the user name and place your finger on the [1-to-1 authenti-
cation].
- Press [ID & PW] to [Login] by entering the [User Name] and the [Password], without using the authenti-
cation unit.

When [1-to-many authentication] has been specified

%
Place your finger on the authentication unit.
Authentication Unit (biometric type) AU-101
The basic settings screen appears.
10-18
Using an authentication unit (biometric type)
Authentication Unit (biometric type) AU-102
10.1
VL3622c/VL2822c/VL2222c