Oce Color System 200 Operator's Manual page 118

There are several restrictions concerning area
editing. See "Area Designations Restrictions," on
p. 3-21.
The Paint function adds color in a designated
area.
When an editing function is set, those keys for
editing functions that can not be set together are
dimmed in the display.
If the C key is pressed, the area that was set
last is canceled. Select either YES or NO .
If the ADD/CHANGE AREA(S) key is
pressed, previously set areas and editing functions
can be changed or added. (See p. 3-14.)
Up to 30 area editing can be specified.
For details on what happens when areas
overlap, see "When Designated Areas Overlap," on
p. 3-21.
Area Designation (Using the Edit Pen)
3-10
Multiple Editing
Press the key for the desired editing functions.
If a copy setting key is pressed, the selected function is displayed on
the setting screen. The methods for setting each of the functions are
explained below.
SINGLE COLOR
4-FULL COLOR/3-FULL COLOR see p. 1-59
COLOR CONVERSION
COLOR GRADATION
BASE COLOR
COLOR FILTER
PAINT
6.
Press the OK key.
7.
Continue making settings for Area Editing 2.
When the area editing settings are complete, proceed to step 8.
To continue specifying other area editing:
1. Designate an area.
To desigate an area, see "Designating Areas," on p. 3-8.
2. Select the editing functions for the area(s).
8.
Press the OK key.
The Area Designation is set.
see p. 1-31 TEXT EDITING
TEXTURE
see p. 1-56 NEGA/POSI
see p. 1-33 ORIGINAL TYPE
(Basic Operations Manual)
see p.1-42 COLOR BALANCE
see p. 1-38 SATURATION ADJ.
see p. 1-44 HUE ADJUST
see p. 2-10
see p. 2-22
see p.2-7
see p. 2-25
see p. 1-22
see p. 1-22
see p. 1-22