Making Copies With The Basic Settings - Oce Color System 200 Operator's Manual

Making Copies with the Basic Settings

For details on how to program the basic copy
settings, see p. 2-4 of chapter 2 "Basic Copying" in
the Basic Operations Manual.
With the screen as shown at right, if a One-point
Designation is made with a red highlight
marker, the copy is made with
EDITING FEATURE: Base color (entire enclosed)
EDITING COLOR: Red.
To confirm the settings, check the MARKER
COLORS, DESIG.METHODS, EDITING
FEATURES, and EDITING COLORS on the
adjacent line.
Marker Editing (Partial Editing by Designating an Area with the Highlight Markers)
3-28
The Marker Designation is made with the basic settings. The basic settings
are as follows:
Red marker One-point designation:
Encircled area designation: Single color - red
Blue marker One-point designation:
Encircled area designation: Single color - blue
Green marker One-point designation:
Encircled area designation: Single color - green
1.
Marker Editing
Press the key.
The basic Marker Editing settings are displayed. Check the Marker Editing
method and the settings that are programed.
2.
Use a highlight marker to designate an area on a black-
and-white original.
Base color - red
Base color - blue
Base color - green