Oce Color System 200 Operator's Manual page 69

If the colors in an image that has undergone
Color Conversion are very rough, increasing the
strength of the filter will suppress the roughness and
produce a smoother image.
5.
Select whether or not the color will have gradations after
conversion.
Make the selection by pressing either the GRADATION key or the
NO GRADATION key.
If necessary, make fine adjustments to the recognition width for the color to
be converted and the intensity of filter effects. If no adjustments are to be
made, proceed to step 6.
Making fine adjustments to the recognition width for the color to
be converted and the intensity of the filter effects
1. Press the FINE ADJUST key.
2. Make adjustments by pressing either the
then press the OK key.
6.
Select the color.
There are four methods for selecting a color.
Select a color from the color palette.
(Color Palette Selection) (See p. 1-65.)
Select a color from the original.
(Designated Color Selection) (See p. 1-67.)
Select a color that was previously registered.
(Registered Color Selection) (See p. 1-69.)
Select a color from the color wheel.
(Color Wheel Selection) (See p. 1-70.)
After a color is selected, the Color Conversion mode is set. Then, the
screen returns to the display in step 1.
key or the key, and
Color Creation
1-57