If the C key is pressed with no points selected,
all of the points displayd are deleted.
4.
Add/Delete a point.
Adding a point
Using the edit pen input the point to be added.
Deleting a point
1. Select the point to be deleted by pressing either the
key. The point selected is displayed in the area monitor as a fat
dot.
2. Press the C key.
5.
Press the OK key.
6.
Designate the color.
7.
Continue the Coloring setting, or end the Coloring
setting process as necessary.
To continue and set Coloring setting process
1. Select the object for coloring.
2. Select the point(s).
3. Select the color.
To end the Coloring setting process
Press the OK key.
key or the
Color Creation
1-53