Table of Contents
Advertisement
When using Coloring, designate a point inside
the enclosed area. If you designate a point on the
line of the enclosed area, Coloring may not be
performed properly.
You can designate a maximum of 30 colors and
200 points. For each color(mode) you can designate
up to 15 areas.
The Select Point keys can be used to delete
points that have already been designated. (See
p. 1-53.)
Color Creation
1-46
5.
Use the edit pen to designate the part of the original that
you want to color.
6.
If there are points with the same Coloring setting they
can be designated one after the other with the edit pen.
7.
Press the OK key.
Advertisement
Table of Contents
