Gloss Adjustment - Oce Color System 200 Operator's Manual

Gloss Adjustment

For details on how to program the basic copy
settings, see p. 2-4 of chapter 2 "Basic Copying" in
the Basic Operations Manual.
If the C key is pressed, the screen returns to
the standard display.
In the following cases the Gloss Adjustment can
not be selected.
When the Stack bypass is selected and
either Transparency or Special paper 1 or
Special paper 2 have been selected in the
paper type selection.
When the transparency feeding location has
been selected in the cassette selection.
When the Transparency Interleaving mode
has been set.
When setting the paper size for Other Sizes
to X>420 and Y>297.
If the C key is pressed, the screen returns to
the standard display.
In the following cases the Matte Finish can not
be selected.
When the stack bypass is selected in the
paper selection.
Gloss Adjustment/Sharpness/Black Adjustment
1-18
1.
One Touch
Press the Color key.
2.
Press the GLOSS ADJUSTMENT key.
3.
Select one of MATTE FINISH , STANDARD , or GLOSSY
and press the OK key.
Highlighted.