Single Color (Making Copies In One Specific Color) - Oce Color System 200 Operator's Manual

Single Color (Making Copies in One Specific Color)
For details on how to program the basic copy
settings, see p. 2-4 of chapter 2 "Basic Copying" in
the Basic Operations Manual.
For details on the Color Selection Flow, see p.
1-63.
If the C key is pressed, the screen returns to
the standard display.
If the C key is pressed, the screen returns to
the display in step 1.
If the copier is not equipped with the Editor, only
"Color Wheel " and "Registered Color" can be
selected.
This mode makes copies in one specific color.
1.
Color
Press the Creation key.
2.
Press the SINGLE COLOR key.
3.
Select a color. There are four ways to select a color.
Select a color from the color palette.
(Color Palette Selection) (See p. 1-65.)
Select a color from the original.
(Designated Color Selection) (See p. 1-67.)
Select a color that was previously registered.
(Registered Color Selection) (See p. 1-69.)
Select a color from the color wheel.
(Color Wheel Selection) (See p. 1-70.)
After a color is selected, the Single Color mode is set. Then, the screen
returns to the display in step 1.
Color Creation
1-31