Table of Contents
Advertisement
Slanted Image (Giving the Original Image a Slant on Copies)
For details on how to program the basic copy
settings, see p. 2-4 of chapter 2 "Basic Copying" in
the Basic Operations Manual.
If the C key is pressed, the screen returns to
the standard display.
If the C key is pressed, the screen returns to
the display in step 1.
The angle of the slant can be specified from
+45 to –45 in 1 increments.
Other Image Creation modes can also be set.
Image Creation
2-20
This mode makes copies giving the image a slant.
1.
Image
Press the
Creation
key.
2.
Select the SLANTED IMAGE key.
3.
Specify the angle of the slant.
Specify the angle by pressing either the
4.
Press the OK key.
The Slanted Image settings are complete.
key or the
key.
Advertisement
Table of Contents
