Table of Contents
Advertisement
The target to which color is to be added must
have a line of width 1mm.
The target to which color is added will be
increased by approximately 0.3mm around the outer
edge.
4.
Select the target to which color is to be added.
BACKGROUND COLORING : Press this key to add color to the
IMAGE COLORING :
Background Coloring
(designated area)
Adding color to the background
1. Select the Background Coloring function.
DESIG. AREA :
ENTIRE ENCLOSED : The entire region inside the border of the
Adding color to the image
1. Press the IMAGE COLORING key.
The image Coloring screen is displayed.
background, excluding parts of the
image that are inside the area.
Press this key to add color to parts of
the image that are inside the area.
Original
Background Coloring
(entire enclosed)
The inside of the border of the original is
recognized as the area to be colored. If
another border exists within the first
border, the area inside the inner border is
not recognized as an area to be colored.
original is recognized as the area to be
colored.
Color Creation
Image Coloring
1-45
Advertisement
Table of Contents
