Table of Contents
Advertisement
To add a different color, repeat steps 4 through
8.
If you press the ADD/ADJUST COLORING
key, you can change / add Coloring setting that has
been set.
8.
Select a color.
There are four methods for selecting a color.
Select a color from the color palette.
(Color Palette Selection) (see p. 1-65.)
Select a color from the original.
(Designated Color Selection) (see p. 1-67.)
Select a color that was previously registered.
(Registered Color Selection) (see p. 1-69.)
Select a color from the color wheel.
(Color Wheel Selection) (see p. 1-70.)
After a color is selected, the Coloring Setting 1 (Coloring [1]) is set. Then,
the screen returns to the display in the Coloring Setting 2 (Coloring [2]).
9.
The next Coloring setting (Coloring [2]) can be carried
out.
When the Coloring settings have been completed, go to
step 10.
To continue and set Coloring setting process
1. Select the object for coloring.
2. Select the point(s).
3. Select the color.
10.
Press the OK key to complete the Coloring.
The coloring setting process is complete.
Color Creation
1-47
Advertisement
Table of Contents
