Changing The Marker Editing Features - Oce Color System 200 Operator's Manual

Changing the Marker Editing Features

For details on how to program the basic copy
settings, see p. 2-4 of chapter 2 "Basic Copying" in
the Basic Operations Manual.
Check the Marker Editing method and the
settings that are programmed.
Marker Editing (Partial Editing by Designating an Area with the Highlight Markers)
3-30
The settings used to make the copy in the above example are as follows:
Red marker One-point designation:
Encircled area designation: Text Editing (Contour) - red
Blue marker One-point designation:
Encircled area designation: Single color - gray
Green marker One-point designation:
Encircled area designation: Blanking
Changing the copy settings and the selected color,
and then making a copy
1.
Marker Editing
Press the key.
Changing the Editing
Feature
(see p. 3-31)
2.
Change the settings. There are two types of settings:
Changing the editing feature
Changing the editing color
Base color
Base color
Base color
Changing the Editing Color
(see p. 3-32)