Changing Previously Set Areas Or Editing Functions - Oce Color System 200 Operator's Manual

Changing Previously Set Areas or Editing Functions

The items that can carried out with the Coloring
function are as follows:
Adding an Area editing
Changing an Area editing settings
Adding / Deleting an area
Shifting / Reducing the area point
Changing the copy settings
Deleting the Area editing
If there are no AREA EDITING keys not to be
reversed on the screen that is displayed, press the
NEXT PAGE key to display the next screen.
Area Designation (Using the Edit Pen)
3-14
The operations described below are performed on the screen that is
displayed after the Area Designation settings are completed.
Adding an Area Editing
1.
Press the AREA DESIGNATION
2.
Press the AREA EDITING key that is not highlighted.
key.